x-rep update Archives

Three-Pound Muscle Gain After Only One Workout?!

Q: In your X-Rep Update #1 e-book you discuss a study that produced a three-pound muscle gain after only one workout with static-contraction sets. Do you think that’s true, that much muscle after only one workout? And if so, should I do most of my sets just holding the weight statically?

A: The researchers used the most sophisticated body-composition-measuring device available at the time, known as a BodPod, so we have no reason to doubt their results. Subjects did a full-body workout that consisted mostly of one static-contraction set for each muscle and then rested for 14 days. Most gained muscle, and one subject packed on an amazing three pounds of muscle from that one workout, but…

[Read more…]

Muscle-Building Tips, Tricks, and Pics

Q: The X-Rep workout program I’m using from the X-Rep Update #1 e-book is amazing. I added a couple pounds of muscle after only two weeks, and I swear I’m seeing new cuts and striations I’ve never seen on me before. Do you notice more size and detail when you use the fascia-expansion techniques?

A: Standard POF protocol is the midrange exercise, followed by the stretch exercise, followed by the contracted exercise. For example, bench presses (midrange), dumbbell flyes (stretch), and cable flyes (contracted). Merely switching the order of the last two exercises provides more of a stretching effect on the muscle-fiber encasements, which allows for more growth to occur…

[Read more…]

Stretch Overload: Your Mass Gains Will Explode

Q: You’ve mentioned an animal study that produced a 300 percent muscle mass increase after only a month of stretch workouts. That’s truly incredible. Is there more info? How do I duplicate those stretch procedures in my workouts to get that kind of muscle growth?

A: We refer to that animal study by Antonio and Gonyea in many of our X-Rep e-books, but the most extensive analysis was in X-Rep Update #1. Here’s a quote from Jose Antonio, Ph.D., from that e-book: [Read more…]

Chisel in Freaky Muscle Size and Detail

Q: I’ve been using X Reps for about a month now, and I’m noticing new muscle in places like my inner chest and lower lats. Even my lower biceps are higher and fuller. Is that normal? I love X Reps!

A: While X Reps—end-of-set partials at the semi-stretch point of an exercise—are excellent at keeping tension on the muscle and activating dormant muscle fibers, they can bring out size and detail with new muscle density at the insertion point, such as the inner pecs…

Here’s a quote from Jacob Wilson, Ph.D., that we used in our X-Rep Update #1, that explains:

Partial-range reps in the lower range of a muscle [a.k.a. X Reps], can actually add sarcomeres to a muscle fiber, which would fill out the area of a muscle where it is inserted.

We believe that’s part of the reason we made such dramatic progress so quickly that first year we integrated X-Rep partials at the end of some of our sets—adding sarcomeres to muscle fibers creates much more muscle size and detail, and it obviously did that for us in only five weeks with the X technique (no drugs, not trick photography)…

A good example of X Reps is at the end of a set of chinups. When you can no longer do full-range reps, you lower to near the arm’s-extended position, and pulse up to near the halfway point, doing as many of those low-end partials as possible.

That area of the stroke, where the target muscle is semi-stretched, is where you activate the most muscle fibers. So at the end of a set, you get at many more growth fibers by gritting your teeth and grinding out partials in that key area…

In a study reported in the 1988 issue of the Journal of Applied Physiology, three groups of men performed isometric exercise for their biceps:

Group 1: trained their biceps isometrically at 25 degrees (the X Spot—0 degrees is full extension)

Group 2: trained their biceps isometrically at 80 degrees—just below the halfway point

Group 3: trained their biceps isometrically at 120 degrees—near full contraction

While all subjects showed strength increases throughout the range of motion—not just in the position trained—the group that attained the highest increase throughout the range of motion was Group 1. That’s the group that was doing a static X-Rep at the semi-stretch position…

That shows the extreme muscle-fiber-activating power of the X Spot and why adding end-of-set X Reps can make any set three to five times more powerful at building muscle mass for more size and detail. And that’s why we love X Reps, too!

Note: For more info on the info above, see the X-Rep Update #1 e-book, and for our massively successful original X-Rep experiment, see The Ultimate Mass Workout.

Till next time, train hard—and smart—for BIG results.

—Steve Holman and Jonathan Lawson
www.X-Rep.com

ATTENTION OVER-40 BODYBUILDERS

One of the most interesting read-me pages on Testosterone and other muscle-building hormones we’ve seen is The Truth About Testosterone.

It even talks about a fruit, a specific part, that can up your T naturally. Cranking up your testosterone will not only get you jacked in the gym, but in the bedroom too—not to mention help rip up your midsection as it ignites fat burning. If that interests you, there’s more from our colleague and registered dietician, HERE.

10X Muscle Expansion

Q: I just read your X-Rep Update #1 e-book and also your Ultimate 10×10 Mass Workout. I am thoroughly impressed. What great info. I learned a lot and am applying many of your methods. I was especially intrigued by the fascia-expansion workout in X Update. It makes sense to end a bodypart routine by supersetting the contracted-position exercise with a stretch one to make room for extra growth to happen; however, I can’t superset in my crowded gym. What do you think about just ending each bodypart workout with 10×10 on a stretch-position exercise to expand the fascia?

A: Man, we love it when trainees use their heads and come up with a killer idea. That’s an excellent way to use 10×10 to get major muscle expansion, one we hadn’t originally considered. It’s an ideal solution for trainees who want to continue to use heavy weight on the big exercises, but still add on 10×10 to get a BIG bang in muscle gains… [Read more…]

Get-Wide Back Attack

Q: I have almost all of your e-books. I can’t begin to tell you how much muscle they’ve helped me build. I’d be lost without them, and I reread them often. My question is about back width, which is one of my weak points. In The Ultimate Mass Workout [the original X-Rep manual] you say that parallel-grip chins is the Ultimate Exercise for lats. But in many of your programs, like the POF-X workout in the X-Rep Update #1 e-book, you have wide-grip pulldowns as the big midrange move for lats. But what about chins? I’ve read that wide-grip chinups are the best lat exercises. Can you clarify, please?

A: For most trainees, parallel-grip chins will put the biceps in an advantageous position to maximize pulling power, but not so good as to make the biceps the prime mover. That’s why we say it’s the Ultimate Exercise for lats—if you’re only going to do one exercise for lats, that’s at the top of the list.

But if you’re doing a full 3-way Positions-of-Flexion workout for lats, you can afford to use wider, overgrip chins to activate different fibers with the arms pulling into the torso laterally. You get the forward-pull function with the stretch and contracted exercises…

For example, wide-grip chins force your upper arms to pull into your sides more laterally than from the front, as with parallel-grip chins. That will put different fibers at a leverage advantage. Then you move to pullovers, the stretch-position move, which has your upper arms pulling toward your torso. Last is stiff-arm pulldowns, the contracted-position exercise, which also has your upper arms pulling into your torso from the front.

If you did parallel-grip pulldowns as your big midrange move, you wouldn’t have any lateral-pulling exercises in your lat workout. So even though the wide-grip chin may be somewhat inferior to the parallel-grip version, in a POF program it provides unique fiber activation due to the lateral angle of pull.

What about wide-grip pulldowns instead of chins? Well, wide-grip chinups provide better semi-stretch-point overload down near the bottom of the stroke—you can’t rock back as you can on pulldowns; however, you cannot alter the angle of your torso on chins as you can on pulldowns. Angling your torso back as you pull down puts lower-lat fibers in an advantageous position…

Because of the different fiber-activation patterns, we usually suggest that those with lat-width problems do two sets of wide-grip chins, then one set of pulldowns with a slight backward lean. That should give you new lat development and flare for seam-stretching width.

Note: The 3D Muscle Building e-book is the Positions-of-Flexion manual, with POF workouts for every bodypart.

Till next time, train hard—and smart—for BIG results.

—Steve Holman and Jonathan Lawson
www.X-Rep.com

ATTENTION OVER-40 BODYBUILDERS

One of the most interesting read-me pages on Testosterone and other muscle-building hormones we’ve seen is The Truth About Testosterone.

Ultimate Exercises and Mass Machines

Q: I notice that in your Ultimate Exercises for each bodypart [listed in The Ultimate Mass Workout e-book] that some of them are on machines. Then in many of the programs in that e-book, as well as your others, you have some machine exercises in the workouts, such as pulldowns and Smith-machine incline presses. Most of the pros say to stay with free weights. If I want ultimate mass, shouldn’t I just stick with barbells and dumbbells?

A: Is it better to travel by horse or car? It depends on the terrain, right? Yes, in many instances barbells and dumbbells are best because they allow a more natural movement—more freedom. Machines tend to restrict the stroke to one plane, as in the vertical bar movement on Smith-machine incline presses or squats. [Read more…]

Eye-Popping Shoulders: Full-Range Workout

Q: I’m using the full Positions-of-Flexion delt routine [from the 3D Muscle Building e-book], but my shoulders still suck. I do dumbbell upright rows (midrange), incline one-arm laterals (stretch), and standing laterals (contracted). I also do dumbbell presses after that and bent-over laterals [for rear delts]. I do two working sets for each exercise. I’m wondering if I should add more exercises and more sets. Or should I just train harder?

A: It sounds like you’re pretty frustrated, so you’re probably blasting your delts damned hard already. Training harder probably isn’t the solution.

How about increasing volume? A few more sets may produce more mass; however, before you go that route, which can sap recovery ability, we suggest you try some exercise manipulation… [Read more…]

Sore Muscles for More Mass?

Q: I get sore muscles after almost every workout, and then I’m still sore the next time I go to the gym. Is it bad to train a muscle when it’s still sore?

A: Scientists believe that sore muscles are caused by micro-tears in the fibers. In other words, it’s damage. Training a muscle hard while it’s still sore is like scratching the scab off of a wound before it’s completely healed. It impairs the healing process and can cause damage that retards proper recovery.

[Read more…]

Embarrassing Gym Moments

Q: I’m using an X-Rep-based routine in the X-Rep Update #1 ebook I picked up a couple weeks ago, but do I have to use Static Contraction (StatC) sets to get the best results from it? I feel like an idiot holding a weight in the flexed position [on contracted-position exercises]. People at my gym look at me weird. LOL!

A: You don’t have to use any of the tactics if you aren’t comfortable with them or if they cause any embarrassing gym moments. BUT… Are you going to let what other people think slow down your gains?

As we explain in the X Update ebook, that hold technique on contracted-position exercises, like triceps pushdowns (below), added [Read more…]